FLOOR BOX SET ELECTRAPLAN EKEQ06MR FE 6M CAVITY RST

LARA floor box package for recessed installation, square, height-adjustable, including a recessed installation frame made of steel sheet, 4 x M8 threaded rods, 4 x M8 locking nuts, 1 x grounding conductor 300 mm, a cassette-type floor box cover Q06 with 15 mm floor finish recess, seal, cable clamp, 2 x equipment boxes for 45 x 45 mm equipment. Equipment to be ordered separately as 45x45 channel fittings, for example from the gallery series. The product is suitable for installation into hollow core slabs or similar floor surfaces in dry indoor areas with dry-cleanable floors. Complies with standards DIN EN 50085-1 and DIN EN 50085-2-2. NOTE! The hollow in the hollow core slab must be at least 205.5 x 205.5 mm wide as per the installation opening dimensions of the box being used. Minimum installation depth is 90 mm. The hollow is used as a cable route and installation space for the box. The recessed installation frame of the package is installed into an open hollow or a cast-in opening with a recess for the floor box. The cassette cover of the floor box is attached to the frame and height-adjusted using the adjustment strips supplied with the package. Height adjustment of the box cover to the finished floor level is possible within a range of 5 - 22 mm. This product description is an automated translation of the original Finnish description.