MOTION DETECTOR EE861 220 16A IP55 PSE ANTHRA

Additional functional motion detector for outdoor areas with 220° detection beam, IP55 anthracite This motion detector is designed to control lighting in outdoor areas of commercial and residential buildings based on detected human movement within the detection area. The detection angle is 220° with a maximum detection distance of 16 m when the detector is installed at the recommended mounting height of 2.5 m. Horizontal detection head orientation is +/- 80° and vertical detection head orientation allows +90°/-30°. Detection is achieved with precise Fresnel lens technology. The detection beam can be restricted using a cover mask provided with the detector that attaches to the front of the lens. Off-delay, illuminance threshold, and sensitivity can be adjusted via the device's control dials or optionally using the EE806 remote control from the accessory range, also for impulse control. Sensitivity is adjustable between 20% and 100%. The detector is equipped with a potential-free normally closed contact that is isolated from the supply voltage. Mounting directly to wall or ceiling. Angled mounting is possible with the separately orderable angle adapter EE856. Operating voltage: 230 V~ +10%/-15% Frequency: 50/60 Hz Contact load capacity: 16A 250V AC1 Power consumption (standby): ~ 1.2 W 230 V LED lamps: 20 x 20 W Energy-saving lamps: 20 x 20 W 12 V halogen lamps: 1500 W 230 V incandescent and halogen lamps: 2300 W Fluorescent lamps with parallel compensation: 400 W /47 µF Fluorescent lamps ELL: 580 W Detection angle: 220° Detection range lateral: each side ~ 6 m Off-delay, adjustable: 5 s ... 30 min Illuminance threshold, adjustable: ~ 5 ... 1000 lux Operating temperature: -20 ... 55 °C Dimensions (L x W x H): 91 x 139 x 153 mm Color: anthracite matte This product description is an automated translation of the original Finnish description.