MODULE ENCLOSURE S/R UNIVERS FWU52K1 5X12M+MEDIA IP30

Field-structured modular enclosure for flush mounting on lightweight partition walls or masonry walls according to DIN EN 61 439-1/-3, following measurement standard DIN 43 870. For devices up to 125 A rated current, with air and creepage distances according to VDE 0110/1-2. The product consists of a housing body made of steel sheet, a flush mounting frame, and a door, with visible surfaces powder-coated in RAL 9010 color. Enclosure with one door. The modular fields on the left side of the enclosure are equipped with 7.5 mm high DIN rails spaced 125 mm apart and finger guards. These fields are also fitted with PE/N-QuickConnect connectors mounted on a connector holder. The data installation field is equipped with an installation plate mounted on perforated support rails without touch protection. Internal touch protection (SKII) made of plastic, cable entries with removable plastic flaps equipped with cable strain relief. Door with adjustable internal hinges and opening angle up to 110°. Door handedness can be changed without tools. Side and rear panels can be equipped with cable entries if required. Flush mounting frame depth from the mounting surface is only 13 mm. Door trim can be equipped with an additional locking device. Height of installed product: 853 mm Width of installed product: 603 mm Depth of installed product: 112 mm Number of modules: 60 Protection class: II Ingress protection rating: IP30 RAL color code: 9010 Color: pure white Number of rows in enclosure: 5 Enclosure material: steel sheet Door locking type: latch latch lock This product description is an automated translation of the original Finnish description.