MODULAR ENCLOSU FL FE UNIVERS FWU31S 3X12M QC IP30

Surface-mounted modular enclosure for flush mounting on lightweight partition walls or masonry walls according to DIN EN 61 439-1/-3, following DIN 43 870 dimensions. For devices up to 125 A rated current, with air and creepage distances according to VDE 0110/1-2. The product consists of a housing body made of steel sheet, a flush mounting frame, and a door, with visible surfaces powder-coated in RAL 9010 color. Enclosure with one door. The modular fields within the enclosure are equipped with 7.5 mm high DIN rails spaced 125 mm apart and finger guards. These fields are also fitted with PE/N-QuickConnect connectors mounted on a terminal carrier. Internal touch protection (SKII) made of plastic, cable entries with removable plastic flaps equipped with cable strain relief. Door with adjustable internal hinges and opening angle up to 110°. Door handedness can be changed without tools. Side and rear panels can be equipped with cable entries if required. Flush mounting frame depth from the mounting surface is only 13 mm. Door seal can be equipped with an additional locking device. Installed product height: 553 mm Installed product width: 353 mm Flush mounting depth: 112 mm Number of modules: 36 Protection class: II Ingress protection rating: IP30 RAL color code: 9010 Color: pure white Number of rows in enclosure: 3 Enclosure material: steel sheet Door locking type: latch strike This product description is an automated translation of the original Finnish description.