SWITCH INSERT 25-400W 2W RCLPD UR

Switching base, 1-channel electronically on/off output for mounting systems for Berker Series R.classic and Series 1930 with round mounting plate. Operating voltage 230 V~ Frequency 50/60 Hz 230 V incandescent and halogen lamps 25 ... 400 W Dimmable 230 V LED lamps 5 ... 70 W Dimmable low-voltage lamps 13 ... 80 W Dimmable conventional transformers 25 ... 400 VA Electronic transformers and double-output transformers 25 ... 400 W Number of load points unlimited Cable length for remote controls max. 50 m Load cable length max. 100 m Screw terminals (max.) 2 x 1.5/1 x 2.5 mm² Operating temperature -5 ... +45 °C Mounting depth 32 mm Warning! Connect only dimmable 230 V PL or LED lamps. Suitable for use only with dimmable loads! Do not connect inductive and capacitive loads together. Comprehensive transmitting and receiving functions, together with KNX radio application modules. - Naturally low energy consumption - Automatic setup for dimmable loads (auto Detect function) - Lamp-saving soft start - Optimization of dimming function by fine-tuning load type and special setup mode - No conductive connection between mounting ring and mounting pins - Expansion unit output for button (normally closed contact), single-stage operation and motion sensor expansion unit - Short-circuit and overload protected (electronic fuse) - Marked This product description is an automated translation of the original Finnish description.