SWITCH INSERT 2X300W 2W RCLPD UR

Electronic on/off switch module, 2-channel replacement for crown switch, without neutral conductor. Compatible with square-shaped mounting system series S.1, B.x, Q.x, K.x, and R.x. Operating voltage 230 V~ Frequency 50/60 Hz Incandescent and halogen lamps per channel 35 ... 300 W Dimmable 230 V LED lamps per channel 12 ... 54 W Dimmable low-voltage lamps per channel 15 ... 54 W Dimmable conventional transformers per channel 35 ... 300 VA Electronic transformers and double-output transformers per channel 35 ... 300 W Unlimited number of low-voltage points Cable length, remote controls max. per channel 50 m Load cable length max. 100 m Screw terminals (max.) 2 x 1.5/1 x 2.5 mm² Operating temperature -5 ... +45 °C Installation depth 32 mm Warning! Connect only dimmable 230 V PL or LED lamps. Suitable for use only with dimmable loads! Do not connect inductive or capacitive loads together. Comprehensive transmitting and receiving functions, together with the quicklink radio application module. - Naturally low energy consumption - Automatic setup for dimmable loads (Auto Detect function) - Lamp-saving soft start - Optimization of dimming function by fine-tuning load type and special setup mode - No conductive connection between mounting ring and mounting pins - 2 expansion unit outputs for button (normally closed contact), separate socket operation - Short-circuit and overload protected (electronic fuse) - Marked Compatible application centers: 2-part button 8514 21 .. 2-part quicklink radio button 8514 61 .. 4-part quicklink radio button 8564 81 .. This product description is an automated translation of the original Finnish description.