MULTIFUNCTION STAIR CASE TIME

Staircase timer DIN with cleaning delay and shutdown warning additional functions for controlling corridor and staircase lighting via corridor buttons or detectors providing impulse commands. Selection of additional functions via a selector dial on the product side.

Operating voltage 230 V~
Frequency 50/60 Hz
Contact rating 16A 250V AC1
Rated current 16 A
230 V incandescent and halogen lamps max. 2300 W
Fluorescent lamps:
- parallel compensated 1000 VA
Delay time, adjustable 30 s ... 10 min
Shutdown warning 40 s
Turn-on time (EL) 100 %
Operating temperature -10 ... +55 °C
Conductor cross-section (wire) max. 1.5 ... 2.5 mm²
Conductor cross-section (stranded) 1.5 ... 2.5 mm²
Module size DIN 1 mod.

Neutral conductor required! For electronic connections and small fluorescent lamps with high turn-on current, use current limiters type 185. In residential buildings, when complying with standard DIN 18015-2, the automatic shutdown of staircase lighting must be combined with a shutdown warning function.

- with shutdown warning, flashes 40, 30 seconds before shutdown
- with potentiometer for setting timing functions: Auto on/Auto on with shutdown warning/Auto with selectable long-term operation (1 h)/Auto with selectable long-term operation (1 h) and shutdown warning
- latching contact
- slide switch for permanent on/auto
- extremely quiet
- for 3- and 4-wire circuits (automatic detection) This product description is an automated translation of the original Finnish description.