CRIMP TOOL HT336A4

Crimping pliers HT336A4 Crimp dimensions ±0.1mm: HEX .068" / .187" / .213" / .256" mm 1.73mm / 4.75mm / 5.41mm / 6.48mm Compatible connectors include: BNC RG174 connectors TNC RG174 connectors SMA RG174 connectors SMB RG174 connectors FME RG174 connectors FAKRA RG174 connectors Compatible cables include: RF195 / LMR195 / CFD195 / MLL195 RF200 / LMR200 / CFD200 / MLL200 RF240 / LMR240 / CFD240 / MLL240 Usage: Open the crimping tool, insert the connector into the correct die, and slowly crimp the connector until the lever's ratchet mechanism is fully closed. Maintenance: Your Hanlong crimping tool must be kept in good condition. To ensure longer tool life, lubricate the moving parts with a few drops of oil as needed. Crimp adjustment: The star wheel must be adjusted to ensure proper crimping. After prolonged use, the jaws may not close as tightly. Remove the locking screw and adjust the star wheel clockwise until the correct setting is achieved (approximately 1/2 to 1 turn). Reinstall the locking screw. General information on crimping tools: Use the correct hexagonal crimping die for the connectors. If the wrong size is used, the crimp result will be insufficient. Do not re-crimp with a smaller hex die. This product description is an automated translation of the original Finnish description.