CRIMP TOOL HT336G4

Crimping pliers HT336G4 Crimping dimensions ±0.1mm: HEX .042" / .068" / .178" / .255" / .278" mm 1.07mm / 1.73mm / 4.52mm / 6.48mm / 7.06mm Compatible connectors include: BNC male Radiall R142079770 Compatible cables include: HDSDI Klotz - VD104, VD108, Tasker TSK1079, Belden 1694A Usage: Open the crimping tool, insert the connector into the correct opening, and slowly crimp the connector until the lever arm's ratchet mechanism is fully closed. Maintenance: Your Hanlong crimping tool must be kept in good condition. To ensure longer tool life, lubricate the moving parts of the tool with a few drops of oil as needed. Crimp adjustment: The star wheel must be adjusted to ensure proper crimping. After prolonged use, the jaws may not close as tightly. Remove the locking screw and adjust the star wheel clockwise until the correct setting is achieved (approximately 1/2 to 1 turn). Reinstall the locking screw. General information on crimping tools: Use the correct hexagonal crimping die for the connectors. If the wrong size is used, the crimp result will be insufficient. Do not re-crimp with a smaller hex size. This product description is an automated translation of the original Finnish description.