CRIMP TOOL HT336K3

Crimping pliers HT336K3 Crimping dimensions ±0.1mm: HEX .068" / .256" / .295" mm 1.73mm / 6.50mm / 7.49mm Compatible connectors include: BNC female body 5043006 RG6 Compatible cables include: RG6 Tasker TSK1079, Klotz VD104 Usage: Open the crimping tool, insert the connector into the correct die, and slowly crimp the connector until the lever's ratchet mechanism is fully closed. Maintenance: Your Hanlong crimping tool must be kept in good condition. To ensure a longer service life, lubricate the moving parts of the tool with a few drops of oil as needed. Crimp adjustment: The star wheel must be adjusted to ensure proper crimping. After prolonged use, the jaws may not close as tightly. Remove the locking screw and adjust the star wheel clockwise until the correct setting is achieved (approximately 1/2 to 1 turn). Reinstall the locking screw. General information on crimping tools: Use the correct hexagonal crimping die for the connectors. If the wrong size is used, the crimp result will be insufficient. Do not re-crimp with a smaller hex size. This product description is an automated translation of the original Finnish description.