CORE REMOVAL TOOL JAVAC EDGE HI FLOW 1/4 X 5/16

Ultimate Hi-Flow Core Removal Tool is a professional-grade valve core removal tool designed for both vacuum and high-pressure applications. It is intended for HVAC/R service, refrigerant recovery, and system evacuation. By removing flow-restricting valve cores, the tool enables full flow cross-section, significantly accelerating both refrigerant recovery and evacuation while improving achievable vacuum levels. The tool also allows a vacuum gauge to be connected as close as possible to the equipment being evacuated. This tool reduces service time in all systems where refrigerant access is via a Schrader valve. Key Features Full-flow valve core removal Eliminates the restriction caused by the valve core → maximum flow, faster recovery and evacuation Deep-vacuum rating Leak-tight performance under vacuum conditions High-pressure resistance Safe for charging and use with high-pressure refrigerants (e.g., R410A) Magnetic base / secure handling Prevents valve cores from being lost during service Valve core locking removal mechanism Grip and remove the core safely without risk of loss Side port Allows connection of a gauge or hose for evacuation, charging, or testing No tools required Hand-tightened Two sizes in one tool 1/4" and 5/16" Refrigerant compatible A1, HFC/HFO, low-GWP A2L, and A3 refrigerants Maximum allowable operating pressure 800 psi (approx. 55 bar), suitable for high-pressure applications (e.g., R410A) This product description is an automated translation of the original Finnish description.