CHARGING STAT. TESTER KAMIC E-TYPE 2 EV

E-TYPE 2 is designed for testing Type 2 electric vehicle charging stations. It is controlled by the Masterlink Type 2 app installed on an Android phone, tablet, or computer. The app simulates the various states that the charging station and electric vehicle go through before charging begins, ensuring that the charging station functions correctly. The app can read the maximum charging current and pulse width modulation signal strength from the charging station: 10%=6A, 16%=10A, 25%=16A, 50%=32A. This confirms that the charging station is installed correctly and its load balancing functions properly. The tester can also simulate fault conditions such as a diode fault in a short-circuited vehicle and a CP signal error. According to IEC 61851, the charging station must disconnect from voltage within 100 ms upon detection of a fault. E-TYPE 2 also includes a lead and a 4mm connector for connecting to an installation tester. During simulation of the electric vehicle's states, when the C state (charging in progress) is reached, an installation inspection can be performed as with a standard wall socket. During this inspection, parameters such as impedance and short-circuit voltage are measured, insulation testing and residual current device testing are conducted. An extremely compact and easy-to-use tester for charging station installers. Features

• Testing of charging stations equipped with Type 2 connectors
• Verifies the charging station's operation and displays the maximum current available
• Confirms the maximum current reported by the charging station
• Simulates various electric vehicle states: A, B, C, D and diode testing
• Can be connected to all installation testers with standard 4mm probe connectors, e.g. Euromaster E3 installation tester (Part No. 6776257)

This product description is an automated translation of the original Finnish description.