INSTALLATION CABLE-FRHF NHXH 2x2,5 N FE180/E90 D500

Product code
0409811
FRHF installation cable (N)HXH 2x2.5 mm² FE180/PH120/E90 Orange, K500, outer Ø 9.8 mm, HFFR. The flame-retardant and halogen-free NHXH installation cable is intended for fixed electrical installations in dry or humid environments where functionality must be maintained during a fire. The Ören NHXH cables have been tested for cable system fire resistance class E90 according to standard DIN 4102-12. The cable is VDE certified and suitable for use at a voltage level of 600/1000 V. The cable sheath is protected against UV radiation, but if the cable is exposed to sunlight, we recommend protecting it, for example, with a protective conduit or duct. The cable may be installed directly into the ground only when using a protective conduit. E90 cable system testing and VDE E90 certification were performed with OBO BETTERMANN and BAKS cable trays and mounting accessories. - 180 min fire resistance (FE 180) IEC 60331-21 / EN 50200 - 120 min fire resistance with shock (PH 120) EN 50200 - Self-extinguishing in bundle IEC 60332-3-24 Cat C - Low smoke emission IEC 61034-2 - Cable system fire resistance (E90) DIN 4102-12 - VDE certified. Technical data: Operating voltage: 600/1000 VAC, Test voltage: 4000 V, Conductor resistance: 2.5 mm²: <7.41 ohm/km, Operating temperature: -20 °C … +70 °C, Minimum bending radius: 10 x D, Packaging: 250/500 m reel. Construction: Conductors: Electrolytic solid copper wire, Class 1 IEC 60228 / DIN EN 60228 / EN 60228, Conductor insulation: Cross-linked halogen-free polymer compound (Silicon) EN-50363-5 EI8, Conductor colors: 2-core: blue, brown, Insulation thickness on conductor: 2.5 mm²: 0.60 mm, Inner insulation material: HFFR, Outer sheath: HFFR, RAL 2003, orange (EN 50290-2-27), Outer sheath diameter: 9.8 mm. - Flame Retardant Test: IEC 60332-1-2, Flame Propagation Test: IEC 60332-3-24 Cat C, Smoke Density: IEC 61034-2, Corrosive Gas Test: IEC 60754-2, Halogen Free Test: IEC 60754-1, Circuit Integrity Test: IEC 60331-21 (FE/180), Circuit Integrity With Shock Test: EN 50200 (PH/120) This product description is an automated translation of the original Finnish description.

Product details

Technical specifications

Product class (ETIM)Power cable < 1 kV, for permanent installation (EC003248)
Conductor materialCopper
Conductor surfaceBare
Nominal cross section conductor2.5 mm²
Conductor categoryClass 1 = solid
Conductor resistance at 20 °C7.41 Ohm/km
Number of cores2
Twisted coresyes
Material core insulationOther
Specification core insulationOther
Identification/coding colour coreOther
Core identificationColour
Core colourSeveral
With protective conductorno
Drain wireno
Lead sheathno

Product codes

SAPDGD527
STK0409811
PLC0409811
GTIN/EAN6430078842693
Manufacturer part numberNHXH 2x2.5 mm2-500
Vendor material number0409811

Basic information

Package measurements (L x W x H)1000 x 10 x 10 mm
Package volume0.1 l
Package weight0.17 kg
Base unitMeter
Package units500 / 3000
Package contents
UNSPSC26121613
BrandLAATUANTENNI
VendorLAATUANTENNI OY