INSTRUMENTATION CABLE-FRHF JE-H 4x2x0,8 FE180 PH180 E90

Instrumentation cable-FRHF JE-H(St)H FE 180/PH180/E90 4x2x0.80 + 0.80 mm, Orange, K500, outer Ø 9.0 mm, HFFR. The flame-retardant and halogen-free JE-H instrumentation cable is intended for fixed installations in dry or humid environments where functionality must be maintained during a fire for safety reasons. The cable is also suitable for locations where electromagnetic interference may occur. Typical applications for JE-H cables include instrumentation cabling in industrial automation, measurement and control technology, smoke extraction systems, fire suppression systems, fire alarm devices, safety and signage lighting, audio systems, and elevator cabling. The cable's outer sheath is protected against UV radiation, but if the cable is exposed to sunlight, we recommend protecting it with a protective conduit or duct. Although the cable's rated voltage is stated as max. 300 V, it is NOT SUITABLE for 240 VAC mains voltage installations. JE-H instrumentation cable MUST NOT be used for 240 VAC electrical installations nor as an earth cable in direct ground installations. Full reel: 6 km of cable. Technical data Nominal voltage: 300 V. MUST NOT be used for 240 VAC electrical installations. Test voltage: Ø 0.60 - 0.80 mm: 800 V and > 1.00 mm²: 1000 V. Insulation resistance: 100 Mohm/km. Loop resistance: Ø 0.60 mm: 130 ohm/km, Ø 0.80 mm: 73.2 ohm/km, Ø 1.00 mm: 44.4 ohm/km, 1.00 mm²: 36.2 ohm/km, 1.50 mm²: 24.2 ohm/km, 2.50 mm²: 14.8 ohm/km. Operating temperature: -20 °C to +70 °C. Minimum bending radius: 10 x D. CONSTRUCTION Conductors: Electrolytic copper wire, Class 1 IEC 60228, DIN VDE 0295. Conductor insulation: HFFR "Cross Linked" insulation. Color code according to DIN VDE 0815: 1st pair blue/red, 2nd pair grey/yellow, 3rd pair green/brown, 4th pair white/black. Four pairs twisted in groups with numbered plastic tape, numbering starting at 1. Pairs: Twisted layer by layer. Inner separator: PET tape + glass fiber tape. Ground conductor: Tinned copper single wire, Ø 0.80 mm. Outer foil: Al-PET foil. Outer sheath: HFFR, RAL 2003, orange. This product description is an automated translation of the original Finnish description.