FURNITURE LUMINAIRE LENOX 2C 3/4K 4W RST

LIMENTE LENOX-2C is a beautiful and traditional light fixture with a modern and clean-lined design. Its wide, pleasant, uniform and glare-free light is ideal for transitional spaces, display cabinets, and shelves. The slender body makes the LENOX-2C an effortlessly modern choice. The LIMENTE LENOX-2C can be installed either surface-mounted (IP20) or recessed (IP44), and sets always include wiring, the option to switch color temperature (3000 K / 4000 K), and a power supply sized appropriately for the number of lights. The LIMENTE LENOX-2C light features two built-in color temperatures: 3000 K and 4000 K. The color temperature selection is made during installation. By choosing your desired color temperature, you can create lighting perfectly suited to your needs. All LIMENTE LENOX-2C series lights use a new technology that produces uniform light and color temperature, which is both visually pleasing and delivers optimal illumination. Thanks to excellent light output, you can place the lights as far apart as 60–80 cm, allowing them to be installed on both sides of a range hood while ensuring good lighting on the work surface. The light is dimmable with LIMENTE SMART CLASSIC, LUXUS, and GREENLINE series (dimmer no. 640540 and wireless wall controllers no. 640541, 640542, 640543, 640544, 640546, and 640547). The dimmer is installed between the power supply and the lights and includes the same connectors as the power supply. Up to six LIMENTE lights can be connected to the dimmer, provided the maximum load (W) of the power supply is not exceeded. The light is also dimmable with a DALI power supply (LEDDALI100). This power supply is controlled either by a 240 V DALI controller or a push-button switch using the "Push Dim" function. Note that when using a DALI power supply, separate lights must be used, as sets include a standard power supply. Installation of the LIMENTE LENOX-2C light is quick and easy. The LENOX-2C can be installed either recessed or surface-mounted. For recessed installation, a hole is drilled into the base of a cabinet or shelf, and the light is pressed into place. Securing is achieved using springs built into the light. For surface mounting, a separate mounting ring is included with the product and is attached to the base of the fixture with screws. The light is pressed into the mounting ring and locked in place by springs. The power cable (hidden, for example, behind the cabinet) is pre-positioned so that one end reaches near the power supply and the other near the LENOX-2C light. Color temperature selection is made using a "mid-cable" installed between the power cable and the power supply, and all electrical connections are made simply with quick-connect terminals. Installation can be done by yourself. The LENOX-2C comes standard with a 300 cm cable. If this is insufficient, you can order an extension cable (3 m), product number 681588. A maximum of one extension cable per light cable can be connected, resulting in a maximum total cable length of up to 6 meters. Remember to ensure sufficient cable length and that the maximum load (W) of the power supply is not exceeded. Delivery contents: fixture light, 3 m cable with male TOP connector, mounting ring, screws, clear and frosted lens, plastic-free packaging. This product description is an automated translation of the original Finnish description.