LED STRIP LED-RIBBON30 LUX 40W 3000K VA

LIMENTE LED-RIBBON IP44 LUX belongs to the LIMENTE LUX range, where product lifespan and lighting technical features such as color rendering are optimized to the highest possible level. The RIBBON IP44 LUX is an efficient, cuttable LED strip with LEDs positioned extremely close together (192 LEDs/meter). The LED strip can be cut at approximately 4 cm intervals, enabling various customized solutions. The strip is used not only for kitchen task lighting but also as indirect lighting behind mirrors, in skirting boards, furniture, ceilings, and anywhere a light source needs to be virtually invisible. Especially when installed in LIMENTE profiles, the light is pleasantly uniform and even. Both ends of the LED strip come standard with a fixed 5 cm cable and a detachable 300 cm cable. If this is insufficient, you can order an extension cable (3 m), product number 681588. A maximum of one extension cable can be connected per light’s cable, allowing a maximum total cable length of up to 6 meters. The power supply cables on both ends enable the LED-RIBBON to be utilized in two separate sections, thus avoiding unnecessary waste and allowing installation from the power source in two different directions. The LIMENTE LED-RIBBON IP44 LUX is dimmable with the LIMENTE SMART CLASSIC, LUXUS, and GREENLINE series. The dimmer is installed between the power supply and the lights and includes the same splitter as the power supply. Up to six LIMENTE lights can be connected to the dimmer, provided the maximum load (W) of the power supply is not exceeded. Installation of the LIMENTE LED-RIBBON IP44 LUX strip is quick and easy. The power supply cable, often hidden behind cabinets for example, is pre-positioned so that the male end is near the power source and the female end is near the LED-RIBBON LUX strip. Remove the protective film from the strip and press it firmly into place. Finally, connect the power supply cable to the strip and the power source using quick-connectors. The LED-RIBBON LUX must always be mounted on a heat-conductive material such as a light rail. Ensure the mounting surface is absolutely clean and dry before attaching the LED strip. This product description is an automated translation of the original Finnish description.