LED STRIP PROLITE 5M 4000 K, IP20

LIMENTE PRO LED strips belong to the LIMENTE PRO range, where product lifespan and the light fixture's technical features such as color rendering are optimized to the highest possible level. PROLITE LED strips are well suited for under-cabinet and ambient lighting. Especially when installed in LIMENTE PROFILES, the light is pleasantly uniform and even. The standard length of LIMENTE PRO series LED strips is 5 m, and the strip can be cut to desired lengths at approximately 6 cm intervals, enabling various customized solutions. Only the best components are used as standard in these models, ensuring excellent luminous output and efficiency, extremely high color rendering (colors of the illuminated object are reproduced as naturally as possible), and selectable color temperatures of either 3000 K or 4000 K. Each strip comes standard with 3 cm + 200 cm long leads on both ends. If this is insufficient, you can order an extension cable (3 m), product number 681588. A maximum of one extension cable per light fixture lead can be connected, allowing a maximum total cable length of up to five meters. The power supply leads on both ends enable the LED strip to be utilized in two separate sections, thus avoiding unnecessary waste and allowing installation from the power source in two different directions. Additionally, the LED strip can also be extended using separate LED strip connectors (ordered separately), enabling a single 5 m LED strip to be used in as many sections as desired. The LIMENTE PRO series LED strip must be used with a compatible 24 V power supply. Suitable options are listed with the products. If the pre-assembled set dimensions are not suitable for your application, you can order the profile, LED strip, and power supply separately. NOTE! The power supply must always be ordered separately. Dimming and Lighting Control The light fixture is dimmable with LIMENTE SMART CLASSIC, LUXUS, and GREENLINE series (24 V dimmer no. 640540 and wireless wall controllers no. 640541, 640542, 640543, 640544, 640546, and 640547). The dimmer is installed between the power supply and the light fixtures and includes compatible connectors matching the power supply. Up to six LIMENTE light fixtures can be connected to the dimmer, provided the maximum load (W) of the power supply is not exceeded. The light fixture can also be dimmed using a DALI power supply (LEDDALI100). This power supply is controlled either by a 240 V DALI controller or a push-button switch utilizing the "Push Dim" function. Installation of the LIMENTE IP20 PRO strip is quick and easy. The power supply cable, often hidden behind cabinets, is pre-positioned so that the male end is near the power supply and the female end is near the LED strip. Remove the protective film from the LED strip and press it firmly into place. Finally, connect the power supply cable to the LED strip and power supply using quick-connect terminals. PRO series LED strips can be cut at approximately 6 cm intervals, and both ends feature power supply connections, allowing both ends to be utilized separately if needed. PRO series LED strips must always be mounted on a heat-conductive material, such as the optional LED light bar. This product description is an automated translation of the original Finnish description.