SOCKET OUTLET MONO-1 OUTLET KUPARI

MONO-1 is an extremely low-profile socket (minimum surface thickness of 20 mm) designed for installation on tabletops, shelves, furniture, etc. Thanks to its low profile and plug-in power connection, it can also be used in freestanding furniture such as tables, sofas, and bookshelves. MONO-1 contains one socket. When closed, the surface of the MONO socket is flush, making the surface appear smooth and uniform. Thanks to the protective cover design, the socket is also protected against splashing water (IP 54) when closed. MONO-1 is simple and quick to install. The socket must be installed on a surface with a minimum material thickness of 15 mm. There is no upper limit for material thickness if it is a wooden surface, but for stone or glass surfaces, the material thickness must be between 15 mm and 20 mm. A hole according to the installation instructions is made in the tabletop or, for example, the side of an island, into which the socket is tightened from above using integrated fasteners. Mounting is easily performed from the surface, and all fasteners and mounting screws are elegantly hidden. The power cord provided with the socket is connected to the MONO socket, and the other end to a grounded socket. For easier installation and cable passage, the plug is supplied separately and attached at the installation site. If the socket to which MONO is connected is behind a 10 A fuse, then this is also MONO’s maximum load. Similarly, with a 16 A connection, MONO’s maximum load is 16 A. The power of the USB model is distributed according to usage between the USB-A and USB-C ports at 5V / 2.4A – maximum total power of 12W. The standby power consumption of the USB ports in MONO sockets is <0.1W. This product description is an automated translation of the original Finnish description.