LED STRIP PROCOM 5M 4000 K, IP20

LIMENTE PRO strips belong to the LIMENTE PRO range, where the product lifespan and the light fixture's technical features, such as color rendering, are optimized to the highest possible level. PROCOM LED strips are used not only for kitchen task lighting but also as indirect lighting behind mirrors, in skirting boards, furniture, ceilings, and anywhere else where the light source should be nearly invisible. Especially when installed in LIMENTE PROFILES, the light is pleasantly uniform and even. The standard length of LIMENTE PRO series LED strips is 5 m, and the strip can be cut to the desired length at approximately 6 cm intervals, enabling various customized solutions. Only the best components are used as standard in these models, offering excellent luminous output and efficiency, extremely high color rendering (colors of the illuminated object are reproduced as naturally as possible), and selectable color temperatures of either 3000 K or 4000 K. Each strip comes standard with a 3 cm + 200 cm lead wire at both ends. If this is insufficient, you can order an extension cable (3 m), product number 681588. A maximum of one extension cable can be connected per fixture's lead, allowing a maximum total cable length of up to five meters. The power supply leads on both ends enable the LED strip to be utilized in two separate sections, thus avoiding unnecessary waste and allowing installation from the power source in two different directions. Additionally, the LED strip can be extended using separate LED strip connectors (ordered separately), enabling a single 5 m LED strip to be used in as many sections as desired. The LIMENTE PRO series LED strip must be used with a compatible 24 V power supply. Suitable options are listed with the products. If the pre-assembled set does not suit your application, you can order the profile, LED strip, and power supply separately. NOTE! The power supply must always be ordered separately. Dimming and Light Control The fixture is dimmable with the LIMENTE SMART CLASSIC, LUXUS, and GREENLINE series (24 V dimmer no. 640540 and wireless wall controllers no. 640541, 640542, 640543, 640544, 640546, and 640547). The dimmer is installed between the power supply and the fixtures and includes matching connectors as the power supply. Up to six LIMENTE fixtures can be connected to the dimmer, provided the maximum load (W) of the power supply is not exceeded. The fixture is also dimmable with a DALI power supply (LEDDALI100). This power supply is controlled either by a 240 V DALI controller or a push-button switch using the "Push Dim" function. Installation of the LIMENTE IP20 PRO strip is quick and easy. The power supply cable, often hidden behind cabinets, is pre-positioned so that the male end is near the power supply and the female end is near the LED strip. Remove the protective film from the strip and press it firmly into place. Finally, connect the power supply cable to the strip and the power supply using quick-connectors. PRO series LED strips can be cut at approximately 6 cm intervals and have power supply connections on both ends, allowing both ends to be used independently if needed. PRO series LED strips must always be mounted on a heat-conductive material, such as the optional LED light rail. This product description is an automated translation of the original Finnish description.