PRESENCE INDICATOR PD2-M-DIM-AP

Remote-controlled, ceiling-mounted PD2-M-DIM presence detectors available in surface and suspended ceiling mounting versions with a circular monitoring area. Integrated light sensor for precise constant light control. The detector features presence control and constant light control. A 230V AC push button can be connected to the detector to turn the lighting on, dim, or off. The push button must not have an indicator lamp. The detector can be programmed via potentiometers or the IR-PDim remote control. The detector can be programmed for automatic mode (VA – lights turn on when entering the space if there is insufficient natural light) or semi-automatic mode (HA – lights do not turn on when entering the space but only activate when the push button is pressed). Semi-automatic mode is recommended if the space has large windows allowing ample natural light. Slave detectors can be connected to the detector to extend the monitoring area. Any Luxomat slave detector can be connected to the master detector. - Office room use. Set the lux value to approximately 500 lux and R1 delay to approximately 5–10 minutes. Set the 20% potentiometer to 30 minutes. The detector automatically turns the lights on when entering the room and maintains constant light control. When leaving the room, the lights dim to 20% after a 5–10 minute delay and immediately brighten upon re-entry. If no movement is detected for 30 minutes, the lights turn off completely. The user can manually turn the lights on, dim, or off using the push button. - Corridor use. Set the lux value to 200–300 lux and R1 delay to approximately 1–2 minutes. Set the 20% potentiometer to a delay of 30–60 minutes. When entering the corridor, the lights turn on/brighten; after the R1 delay, the lights dim to 20%. Upon re-entry, the lights brighten to 100% power (or to the power level corresponding to the constant light control setting of 200–300 lux). If no movement is detected in the corridor for 30–60 minutes, the lights turn off completely. Housing made of UV- and impact-resistant polycarbonate, IP20. The -AP model can achieve an IP54 rating using the IP54 mounting base (3515474). -AP: surface mounting to ceiling; FP: suspended ceiling mounting. 360° monitoring area with a diameter of 4 m when mounted, 10 m when moving laterally, and 6 m when moving toward the detector. Unlimited number of slave detectors can be connected to extend the monitoring area. Lighting control via one channel (1–10V), up to 50 1–10V interface devices. Lighting turn-on time adjustable from 1 to 30 minutes. Guidance light (20% light output) adjustable: off / 1–60 minutes / continuously on (20% guidance light remains continuously on if there is insufficient natural light and no movement in the space). Light level adjustable from 10 to 2000 lx. This product description is an automated translation of the original Finnish description.