PRESENCE INDICATOR PD4N-1C-C-FP LIGHTM.

Remote-controllable, ceiling-mounted PD4N-1C-C corridor motion detectors available in surface and suspended ceiling mounting versions with a large circular and corridor-oriented detection area. One relay controls the lighting. Simple lighting measurement and calculation using an integrated light sensor located inside the lens. The detector can be programmed via potentiometers or the IR-PD3N remote control. Up to 8 detectors can be connected in parallel. Housing made of UV- and impact-resistant polycarbonate. Surface-mounted model –AP, IP44, Class II. Suspended ceiling-mounted model –FP, IP23, Class II. –AP – surface mounting on ceiling, –FP – suspended ceiling mounting 360° detection area with a diameter of 24 m. Corridor-oriented detection area: 40 m diameter when moving sideways and 20 m diameter when moving directly toward the detector, at an installation height of 2.5 m. Recommended installation height: 2.4 – 2.6 m. Up to 8 detectors can be connected in parallel. One switching channel for lighting control. Load capacity: 10 A, 2300 W cosφ = 1; 1150 VA cosφ = 0.5. Light level adjustable from 10 to 2000 lx. Turn-off delay adjustable from 30 s to 30 min/TEST. Remote control programming overrides potentiometer settings. Detector sensitivity is continuously adjustable via potentiometer or in two steps via remote control. 230 V ± 10%. Internal power consumption of detector < 1 W -25°C – +50°C This product description is an automated translation of the original Finnish description.