HOLE SAW HOLE DOZER MILWAUKEE SET 10P

Contains 6 hole saws: ? 25, 32, 40, 54, 68, 76 mm, hole saws for arbors ? 14 - 30 mm, hole saws for arbors ? 32 - 152 mm, 2 arbor adapters and a six-point key. Applications

• These high-quality hole saws can cut the following materials: steel up to 1000 N/mm˛, stainless and acid-resistant steel, cast iron, aluminum, wood, gypsum board, roofing materials, and medium-density MDF board.
• Thanks to precise rotational motion, the saws are suitable for both hand-held and pillar drills (hand feed only).
• Cutting depth is 41 mm.

Maximum Performance

• The 3.5 tooth design and positive 10° tooth angle ensure faster and more efficient cutting.
• Improved heat distribution during cutting maintains tooth sharpness for longer.
• Deeper flutes remove chips more effectively, preventing clogging and heat buildup.
• A special tooth angle reduces chipping of thin materials.
• Variable tooth spacing minimizes friction and binding.
• Beveled grooves on the sides of the saw teeth facilitate the removal of drill chips from inside the hole saw.
• The arbor is easy to attach.
• Aggressive tooth geometry and efficient chip removal reduce the need for feed pressure.

Durable, Premium Materials and Construction

• The tooth cutting edges of the hole saws are made from highly heat-resistant Matrix II premium high-speed steel. The material contains 8% cobalt, ensuring longer tooth life even at high operating temperatures.
• The teeth are heat-treated up to 65 HRC to ensure long durability and service life at temperatures up to 600 °C.
• Matrix II material resists wear and is ideal for cutting hard and difficult materials such as stainless and acid-resistant steel. It is also suitable for cutting softer materials such as wood.
• The 1.27 mm thick steel body of the hole saw is flexible yet sufficiently rigid to maintain its shape.
• The backing plates are made from thick steel, preventing hole expansion over time. The thick backing increases strength and rigidity while reducing vibration.
• The round back plate is especially suited for larger diameter hole saws.

This product description is an automated translation of the original Finnish description.