Roll over image to zoom in
JOINT CONNECTION MP-378S
Product code
1467650
Angle joint
The angle joint is installed like an extension piece for the shelf. If necessary, use the MP downward pull arc for a 90° downward bend. An alternative method to create this angle joint is to cut the side edges of the shelf and bend it to the desired angle on site. The advantage of this method is that no visible seam appears on the shelf, resulting in a more favorable appearance when viewed from below. This product description is an automated translation of the original Finnish description.
The angle joint is installed like an extension piece for the shelf. If necessary, use the MP downward pull arc for a 90° downward bend. An alternative method to create this angle joint is to cut the side edges of the shelf and bend it to the desired angle on site. The advantage of this method is that no visible seam appears on the shelf, resulting in a more favorable appearance when viewed from below. This product description is an automated translation of the original Finnish description.
Product details
Technical specifications
Product class (ETIM)Connector for cable support system (EC002413)
ModelLength- and angle joint
Hinged joint horizontalno
Hinged joint verticalyes
Type of connectionPlug-in connection
Suitable for wire mesh trayno
Suitable for cable ladderno
Suitable for cable trayyes
Suitable for cable support system width500-500 mm
Suitable for cable support system height45-45 mm
Suitable for wire mesh tray filament0 - 0 mm
Length250 mm
Suitable for circuit integrityno
MaterialOther
Stainless steel, pickledno
Material qualityOther
Product codes
SAPANL512
STK1467650
PLC1467650
GTIN/EAN7394333129129
Manufacturer part numberMP-378S
Vendor material number1467650
Basic information
Package measurements (L x W x H)500 x 25 x 40 mm
Package volume0.5 l
Package weight1.09 kg
Base uniteach
Package units1
Package contents–
UNSPSC31162501
BrandMP BOLAGEN
VendorMP BOLAGEN OY
Documents (5)
Environment and safety
Carbon footprint data
Carbon footprint of product manufacturing (A1–A3 GWP value)0.2932
GWP, uniteach
Source for GWP dataEPD
Documents (1)
Sustainability brochures & documents