N-COMFORT DT+ AXJO KABEL N-COMFORT DT+

This unique Nexans thermostat is Bluetooth and Ecodesign approved. It is configured via the N-Comfort app, available for download from Google Play and the App Store. Installation does not require separate programming; the thermostat selects from pre-programmed default settings. For snow or ice melting, the snow melting function must be selected and activated from the settings. Basic Operation

• The thermostat is controlled using a rotating knob.
• Turn the device off by rotating the knob to the OFF position.
• Turn the thermostat on using the knob and select the desired temperature (center position = 25 °C). Set night setback (eco mode, default 19 °C) using an external 230VAC switch.

Full Operation

The user can monitor the room’s latest temperatures and energy consumption, adjust settings, and create a weekly schedule using the free N-Comfort app (for Android and iOS mobile devices). The app can also generate ready-made reports for email transmission. Additionally, it includes built-in user instructions. The thermostat’s red LED indicator flashes rapidly when connected to the N-Comfort app.

Snow Melting Function
Turn the function on from settings: Snow melting ON.

• Minimum and maximum settings define the active knob range.
• When the outdoor temperature is below this setpoint, the snow melting function becomes active.

Snowmelt Hold Minimum Humidity

• When using a wireless temperature sensor, the thermostat also receives humidity data.
• A humidity threshold is set on the thermostat below which snowmelt hold will not activate.

Features

• Bluetooth: version 4.2
• Operating voltage: 230 V - 50 Hz
• Maximum load: 16 A
• Operating temperature: +5 - +35 °C
• External control: 230V - 50Hz
• IP rating: IP20
• Color: gray
• Sensors: external NTC floor sensor or wireless sensor (Bluetooth)

This product description is an automated translation of the original Finnish description.