HAND PUMP NIRA 67 GREY WITH PIPES 2X1MTR

This elegant, frost-proof pressure pump is suitable for both ordinary well shafts and boreholes. The pump generates approximately 1 bar of pressure. This Nira 67 pump package includes two 1-meter pipe modules and a 0.5-meter cylinder, allowing it to reach a depth of 2.5 meters below the wellhead. The pump is gray in color, with a die-cast lower housing and base plate, but the composite upper housing can also be replaced afterward with a different color. The rust-free, frost-proof construction features a lightweight and easily transportable package. Installation The pump nozzle is equipped with a 3/4” internal thread, allowing easy connection to a standard garden hose fitting, enabling water to be pumped even further and to heights above the pump. The Nira 67 is also suitable for boreholes, as more pipe modules can be added than with our other well pump models. The pump cylinder can therefore be lowered up to 20 meters in depth using additional pipe modules available in 0.5-meter, 1-meter, and 3-meter lengths. In addition, up to a maximum of 6 meters of suction pipe can be installed below the cylinder. If the suction pipe extending below the cylinder exceeds 1.5 meters, a foot valve must be installed at its end. The cylinder has a diameter of 90 mm, so a hole of approximately 100 mm in diameter should be provided at the wellhead for this purpose. This product description is an automated translation of the original Finnish description.