HAND PUMP NIRA 67 GREY WITHOUT PIPES

This elegant, frost-proof pressure pump is suitable for both ordinary garden wells and boreholes. The pump generates approximately 1 bar of pressure. This Nira 67 pump package includes the pump body and a 0.5-meter-long cylinder, making it suitable for borehole installations when combined with separately available pipe modules. The pump's color is gray, with a sand-cast lower housing and base plate, but the composite upper housing can also be replaced afterward with a different color. A rust-proof, frost-proof construction with a lightweight and easily transportable package. Installation The pump's nozzle is equipped with a 3/4” internal thread, allowing easy connection to a standard garden hose fitting, enabling water to be pumped further and even to a higher elevation than the pump itself. The Nira 67 is also suitable for boreholes, as more pipes can be added to it than to other Nira well pump models. The pump cylinder can therefore be lowered up to 20 meters in depth using additional pipe modules available in 0.5-meter, 1-meter, and 3-meter lengths. Additionally, up to 6 meters of suction pipe can be installed below the cylinder. If the suction pipe extending below the cylinder exceeds 1.5 meters, a bottom valve must be installed at its end. The cylinder has a diameter of 90 mm, so the well cap should have a hole of approximately 100 mm in diameter for this purpose. This product description is an automated translation of the original Finnish description.