
Roll over image to zoom in


TIMER LTS25 30M 1S/25A 250V IP20
Product code
2612807
LiesiTurva consists of a switching unit, a safety timer, and LämpöVahdista. LiesiTurva is activated by pressing the timer button, and the stove can be used until the timer shuts off the stove at the end of the set time. At the end of the time, LiesiTurva returns to standby mode.
When installing the timer, a fixed time can be selected. The default setting is 30 minutes; other fixed times are 5, 10, 15, 20, 30, 60, 90, 120, 240, and 480 minutes.
The user can additionally set a temporary time on the timer from 1 to 999 minutes with one-minute precision. The timer remembers the last set time.
LämpöVahdi provides additional safety, which is important when long operating times are set on the timer. If LämpöVahdi detects overheating during stove use, it triggers an alarm and cuts off the voltage to the stove. When the temperature drops below the alarm temperature threshold, LiesiTurva returns to standby mode, after which the stove can be used again.
LämpöVahdi is permanently mounted on the rear wall above the stove. LämpöVahdi is pre-calibrated. No sensitivity adjustments are required when putting LiesiTurva and LämpöVahdi into operation. LämpöVahdi complies with the requirements of standard EN 50615.
When installing the timer, a fixed time can be selected. The default setting is 30 minutes; other fixed times are 5, 10, 15, 20, 30, 60, 90, 120, 240, and 480 minutes.
The user can additionally set a temporary time on the timer from 1 to 999 minutes with one-minute precision. The timer remembers the last set time.
LämpöVahdi provides additional safety, which is important when long operating times are set on the timer. If LämpöVahdi detects overheating during stove use, it triggers an alarm and cuts off the voltage to the stove. When the temperature drops below the alarm temperature threshold, LiesiTurva returns to standby mode, after which the stove can be used again.
LämpöVahdi is permanently mounted on the rear wall above the stove. LämpöVahdi is pre-calibrated. No sensitivity adjustments are required when putting LiesiTurva and LämpöVahdi into operation. LämpöVahdi complies with the requirements of standard EN 50615.
- 1-phase, 25A, 230V
- Fixed timer times: 5, 10, 15, 20, 30, 60, 90, 120, and 240 minutes
- Temporary time: 1...999 minutes
- LämpöVahdi provides additional safety, allowing safe use of longer timer settings.
- Fixed installation
- Enclosure class IP20
- Easy to install and use
Product details
Technical specifications
Product class (ETIM)Stove guard (EC002932)
Mounting methodSurface mounted
Nominal voltage230 V
Nominal current25 A
Time setting1-999 min
Number of push buttons2
ConnectionFixed
With sensoryes
Push button inputno
Built-in buzzeryes
Time remaining indicatoryes
MaterialPlastic
Width110 mm
Height170 mm
Depth300 mm
Product codes
SAPCFK493
STK2612807
PLC2612807
GTIN/EAN7394438202802
Manufacturer part number420280
Vendor material number420280
Basic information
Package measurements (L x W x H)300 x 110 x 170 mm
Package volume5.61 l
Package weight1.113 kg
Base uniteach
Package units1
Package contents–
UNSPSC39122208
BrandNORWESCO
VendorNORWESCO AB
Documents (10)
Brochures & documents
Links
Environment and safety
Manufacturer
NameNorwesco Aktiebolag
Postal addressKarlsrovägen 2D, 18253 Danderyd, Sverige