Roll over image to zoom in
SAFETY SWITCH SA216DR 2x16A 500V 7,5kW IP54
Product code
3605229
Compliant with IEC 60947-2 standard, a enclosed safety switch usable also as a load switch and isolator where required. Safety switch marking as a separate label attached to the cover when used as a safety switch. The switch is therefore also suitable for use as a load switch. A lockable lever operated from the side.
Three membrane penetrations on the top and bottom of the enclosure; separate gland seals are not required. Internal cable strain relief for cable securing. Color red clay.
Three membrane penetrations on the top and bottom of the enclosure; separate gland seals are not required. Internal cable strain relief for cable securing. Color red clay.
- Enclosure made of impact-resistant polycarbonate
- Number of poles 2+N+PE
- PE and N bars included
- Compliant labeling labels included
- Rated current 16A AC23A, 500V
- Rated power 7.5kW at 400V
- Enclosure rating IP54
- Maximum conductor cross-sectional area 6mm²
- Cable penetrations 6x16mm
- Enclosure dimensions 86x128x54mm (LxWxH)
Product details
Technical specifications
Product class (ETIM)Switch disconnector (AC) (EC000216)
Version as main switchyes
Version as maintenance-/service switchyes
Version as safety switchyes
Version as emergency stop installationno
Version as reversing switchno
Number of switches1
Max. rated operation voltage Ue AC500 V
Rated operating voltage400-500 V
Rated permanent current Iu16 A
Rated permanent current at AC-23, 400 V16 A
Rated permanent current at AC-21, 400 V16 A
Rated operation power at AC-3, 400 V7.5 kW
Rated operation power at AC-23, 400 V7.5 kW
Switching power at 400 V7.5 kW
Conditioned rated short-circuit current Iq10 kA
Product codes
SAPCGB262
STK3605229
PLC3605229
GTIN/EAN7394438052551
Manufacturer part number305255
Vendor material number305255
Environment and safety
Manufacturer
NameNorwesco Aktiebolag
Postal addressKarlsrovägen 2D, 18253 Danderyd, Sverige