SAFETY SWITCH SA316H DDG 3x16A 1NO 7,5kWIP54

Compliant with IEC 60947-2 standard, the enclosed safety switch can also be used as a load switch and isolator where required. A safety switch label as a separate label is attached to the cover when the switch is used as a safety switch. The switch is therefore also suitable for use as a load switch.

Lockable lever operated from the side. Three cable entries on the top and bottom of the enclosure; separate gland seals are not required. Internal cable clamps for securing cables. Color gray and the enclosure is made of impact-resistant polycarbonate.

Features

• Number of poles: 3+N+PE
• PE and N bars included
• Switch equipped with one normally closed auxiliary contact
• Compliant labeling labels included
• Rated current: 16A AC 23A, 500V
• Rated power: 7.5kW at 400V
• Enclosure rating: IP54
• Maximum conductor cross-sectional area: 6mm²
• Cable entries: 6x16mm
• Enclosure dimensions: 86x128x54mm (WxHxD)

This product description is an automated translation of the original Finnish description.