TIMER LTMS16 30M 3S/16A 400V+LV IP20

LiesiTurva consists of a switching unit installed behind the stove and a safety timer. LiesiTurva activates when the stove is turned on. The timer has a default fixed running time of 30 minutes, which the installer can easily adjust by turning the potentiometer inside the timer. Fixed time options are 5, 10, 15, 20, 30, 60, 90, 120, 240, and 480 minutes. In addition, the user can set a temporary time using the timer button. The temporary time, 1 to 999 minutes, expires after one use and the timer reverts to the fixed time. During operation, the running time can also be extended. When less than 10 minutes remain on the timer, pressing the timer button adds 10 more minutes. This can be repeated twice. When the timer time expires, three crosses light up on the timer. This indicates that the time has ended and the stove control knobs are in the on position. When all stove control knobs are turned off, the timer returns to standby mode, after which the stove can be restarted again. LämpöVahti provides additional safety, which is important when long timer settings are used. If LämpöVahti detects overheating during stove use, it triggers an alarm and cuts off power to the stove. When the temperature drops below the alarm temperature, LiesiTurva returns to standby mode, after which the stove can be used again. LämpöVahti is permanently mounted on the rear wall above the stove. LämpöVahti is pre-calibrated. When installing and using LiesiTurva and LämpöVahti, no sensitivity adjustments are required. LämpöVahti complies with standard EN 50615 requirements.

• 3-phase, 16A, 400V
• LiesiTurva activates when the stove is turned on
• Fixed timer times: 5, 10, 15, 20, 30, 60, 90, 120, and 240 min
• Temporary time: 1 to 999 minutes
• LämpöVahti provides additional safety, allowing safe use of longer timer settings.
• Fixed installation
• Enclosure rating IP20
• Easy to install and use

This product description is an automated translation of the original Finnish description.