JUNCTION BOX W. MEMBRAIN T160KL PP16MM2 IP66

The pre-installed mounting rails have the connectors lifted upward and positioned along the enclosure edges for easy cable passage and connection. Free internal dimensions: 176 x 135 x 67 mm. • Easy lid opening with quarter-turn latches that can also be sealed • The lid can remain hanging on a safety cord during installation • Inspections and measurements are easier when connection points are clearly visible • Tight, soft, and removable cable entry seals (EVA; ethylene vinyl acetate) installed on each side, along with entry grommets on the base and an accessible condensate drain opening on each side • Instead of removable cable entry seals, mounting pipes or cable glands can be installed • The plastic enclosure is UV-protected, made of PP/GF polypropylene with glass fiber reinforcement, with an IP66 sealing class and mechanical protection IK06 according to EN50102 • The supporting enclosure body is made of halogen-free polypropylene and contains no fluorides, chlorides, or bromides • Alignment marks on the bottom edge of the enclosure on each side facilitate installation at the target location • Additional pre-drilled mounting points/holes are provided in the base stiffeners for other required base plates or devices This product description is an automated translation of the original Finnish description.