GAS FILTER OPTREL A1B1E1 E3000X SERIES

A1B1E1 gas filter for Optrel e3000X series blower respirators. Includes user instructions. Single package.

Suitable for work environments where hazardous or toxic gases are present, such as during welding or paint preparation and painting tasks. The filter is installed on the e3000X blower in addition to the TH3P (HEPA) particulate filter. The powered blower thus provides combined protection against both particles and gases.

Explanation of filter type markings:

• A = Filters organic gases and vapors with a boiling point >65 °C. Brown color on the filter side.
• 1 = Gas concentration below 1000 ppm (=1000 ml/m3).
• B = Filters inorganic gases and vapors with a boiling point >65 °C (excluding carbon monoxide). E.g., chlorine and hydrogen sulfide. Gray color on the filter side.
• 1 = Gas concentration below 1000 ppm (=1000 ml/m3).
• E = Filters sulfur dioxide and other corrosive non-acidic gases and vapors. Yellow color on the filter side.
• 1 = Gas concentration below 1000 ppm (=1000 ml/m3).

Additional information on classification:

The A1B1E1 filter is not the same as the ABE1 filter. In the A1B1E1 filter, all gas classes are separated and the capacity class 1 is specified individually for each gas. In contrast, the ABE1 filter combines different gas types into a single marking without individual capacity ratings. This represents a more precise expression of filter capacity. Depending on working conditions and their variations during filter use, the A1B1E1 filter can achieve significantly longer service life, ensure safer occupational safety for professional use, and also achieve considerable cost efficiency.

This product description is an automated translation of the original Finnish description.