RADIATORVALVE COMBINATION ORAS 443100 PRO 3/8 FOR 1-2 PIPE

Oras Stabila Pro is a pre-settable thermostatic radiator valve designed for use in pumped two-pipe systems. The valve's purpose is room-by-room temperature control. The radiator valve is supplied with a gray shut-off/protective cap and without fittings. The valve body features a full marking, flow direction arrow, and manufacturing date stamp. The valve has 17 pre-set values, with pre-set values 1 to 9 in half-number increments. Setting the valve's pre-set value is done with a 13 mm spanner wrench. A positioning mark on the setting sleeve indicates the desired pre-set value to be aligned. Kv values 0.05 - 0.67. The same setting sleeve is used in all models, one spare part. The valve connection dimensions remain unchanged, standard EN215 series S. When adjusting the pre-set value, the entire setting sleeve is not rotated, only the adjustment aperture components. No leakage risk even if the set value is changed after the valve has been in use for an extended period. The thermostatic head connection thread M30x1.5 is also suitable for electric actuators. Products are packed individually in plastic bags. The setting sleeve can be replaced without draining the system using the DemoBlock tool. The valve is not suitable for domestic water systems (body not DZR brass). This product description is an automated translation of the original Finnish description.