RADIATOR VALVE ANGLE ORAS 443110 STABILA PRO 3/8

Oras Stabila Pro is a pre-settable thermostatic radiator valve designed for use in a pumped two-pipe system. The valve's purpose is room-by-room temperature control. The radiator valve is supplied with a grey shut-off/protective cap and without fittings. The valve body features a full marking, flow direction arrow, and manufacturing date stamp. The valve has 17 pre-setting values, with values 1 to 9 in half-step increments. The pre-setting value is adjusted using a 13 mm spanner wrench. A positioning mark on the setting sleeve indicates the desired pre-setting value to be aligned. Kv values range from 0.05 to 0.67. The same setting sleeve is used in all models, with one spare part. The valve connection dimensions remain unchanged, conforming to standard EN215 series S. When adjusting the pre-setting value, the entire setting sleeve is not rotated, only the adjustment aperture components. There is no risk of leakage even if the setting value is changed after the valve has been in long-term use. The thermostatic head connection thread M30x1.5 is also suitable for electric actuators. Products are individually packed in plastic bags. The setting sleeve can be replaced without draining the system using the DemoBlock tool. The valve is not suitable for domestic hot water systems (body is not DZR brass). Features

• connection type: internal thread
• color: nickel-plated
• connection size: G3/8
• DN size (nominal size): DN10
• warm water: max. +120 °C
• material: brass

This product description is an automated translation of the original Finnish description.