EXTENSION POLE PAALUPISTE SCREW POLE

The extension coupler is used to attach the extension pile to the screw pile.

The extension coupler is a connecting component installed between the screw pile and the extension pile, allowing the screw pile to be extended to the desired length.

The extension pile enables the screw pile to be extended to the desired length. The extension pile is attached to the screw pile using an extension coupler, which is a separate accessory ordered as D60.3_2.9Z. The extension pile is attached to the screw pile using the extension coupler and two M16x80mm hex head bolts.

Insert the extension coupler into the screw pile and ensure that the bolt holes are aligned. Insert an M16x80 hex head bolt through the screw pile and extension coupler, and tighten it from the other end using a nut with a wrench or socket wrench. Repeat this process with the extension pile.

Screw piles installed by rotation are a fast and hassle-free foundation method for all construction. Installation causes no vibration or noise and requires no extensive earthmoving. Thus, the soil remains undisturbed and the environment unharmed. Additionally, no frost insulation is required when the screw pile’s helical plate is rotated below the frost line. Moreover, screw piles enable foundations to be installed in locations where other foundation methods are difficult to implement, such as on weak soils or in areas with difficult access.

This product description is an automated translation of the original Finnish description.