FALL PROTECTION ACESSORY COEUR BOLT HCR 12mm 20pcs

An anchor point made of acid-resistant steel for attaching personal protective equipment to rock or concrete. Complete set: Mechanically expanding HCR (High Corrosion Resistance) 12 mm bolt with seals, wedges, nuts, and HCR anchor plate for 12 mm bolt. Suitable for single-user anchoring and fall protection, both for temporary and permanent installations. The HCR model is designed for the most demanding conditions where extended corrosion resistance is critical: chemical industry, tanks, offshore use, ports, ships, lighthouses, and other maritime safety equipment, swimming pools, and other locations using strong cleaning/disinfecting agents, or harsh climbing environments. The large mounting hole facilitates attachment of carabiners and allows mounting of two thick-bodied carabiners on the same anchor. The anchor plate is extremely thick, and the edges of the mounting hole are rounded to protect carabiners from wear regardless of their material. A mechanism preventing rotation of the anchor plate speeds up installation and improves usability: Petzl anchor plates have three friction pads on the back that contact the structure (concrete, rock...). This helps keep the anchor plate in place during installation or when heavily loaded from one side. Suitable for concrete with compressive strength over 25 MPa and rock with compressive strength over 45 MPa. Shear strength of 25 kN in concrete with 50 MPa compressive strength. Tensile strength of 25 kN in concrete with 50 MPa compressive strength. Drill a 9 cm deep hole with a 12 mm diameter for the bolt. The anchor plate can be removed if desired, leaving only a short threaded stud visible on the surface. The anchor plate can be reattached to the thread. Complies with CE EN795 Type A1 and EN959 standards. Material: Highly corrosion-resistant HCR 904 steel. All components of the assembly are made from the same metal to maximize corrosion resistance. Length: 8.5 cm. Weight: 145 g. Maximum service life: unlimited. Supplied in packs of 20. Available spare parts: Coeur HCR 12 mm anchor plate (P36AH 12) Bolt HCR 12 mm bolt (P36GH 12) This product description is an automated translation of the original Finnish description.