FALL PROTECTION ACESSORY COEUR BOLT STAINLESS 12mm 20pcs

Stainless steel anchor point designed for attachment to stone or concrete. Complete set: Mechanically expanding 12 mm bolt with sealing rings, wedges, nuts, and anchor plate for 12 mm bolt. Suitable for single-user anchoring and fall protection, both for temporary and permanent installations. The stainless model is designed for general outdoor installations. Large attachment opening facilitates the attachment of carabiners and allows for the attachment of two thick-bodied carabiners to the same anchor. The anchor plate is extremely thick and the attachment hole edges are rounded to protect carabiners from wear regardless of their material. A mechanism preventing rotation of the anchor plate speeds up installation and improves usability: Petzl anchor plates have three friction stops on the back that contact the structure (concrete, rock...). This helps keep the anchor plate in place during installation or when heavily loaded from one side. Suitable for concrete grades with compressive strength over 25 MPa and rock grades over 45 MPa. Shear strength of 25 kN in concrete grades with 50 MPa compressive strength. Pull-out strength of 25 kN in concrete grades with 50 MPa compressive strength. Drill a 9 cm deep hole with a 12 mm diameter for the bolt. The anchor plate can be removed if desired, leaving only a short threaded stud visible on the surface. The anchor plate can be reattached to the thread or used in other anchor point installations, for example by attaching it to a steel beam with a suitable bolt. Complies with CE EN795 Type A1 and EN959 standards. Material: 316L stainless steel. All components of the assembly are made from the same metal to maximize corrosion resistance. Length: 8.5 cm. Weight: 135 g. Maximum service life: unlimited. Supplied in packs of 20. This product description is an automated translation of the original Finnish description.