FALL PROTECTION ACESSORY COEUR BOLT STEEL 12mm 20pcs

Steel anchor point designed for attachment to stone or concrete. Complete set: Mechanically expanding 12 mm bolt with seals, wedges, nuts, and anchor plate for 12 mm bolt. Suitable for single-user anchoring and fall protection, both temporary and permanent installations. The economical Steel model is designed for installation in dry indoor environments without corrosion agents. Large attachment opening facilitates attachment of carabiners and allows attachment of two thick-bodied carabiners to the same anchor. The anchor plate is extremely thick and the attachment hole edges are rounded to protect carabiners from wear regardless of their material. The anti-rotation mechanism speeds up installation and improves usability: Petzl anchor plates have three friction notches on the back that contact the structure (concrete, rock...). This helps keep the anchor plate in place during installation or when heavily loaded from one side. Suitable for concrete grades with compressive strength over 25 MPa and rock grades over 45 MPa. Shear strength of 25 kN in concrete grades with 50 MPa compressive strength. Tensile strength of 25 kN in concrete grades with 50 MPa compressive strength. Drill a 9 cm deep hole with a 12 mm diameter for the bolt. The anchor plate can be removed if desired, leaving only a short threaded stud visible on the surface. The anchor plate can be reattached to the thread. Complies with CE EN795 Type A1 and EN959 standards. Material: Steel. All components of the assembly are made from the same metal to maximize corrosion resistance. Length: 8.5 cm. Weight: 135 g. Maximum service life: unlimited. Supplied in packs of 20. This product description is an automated translation of the original Finnish description.