HELMET PETZL STRATO VENT HI-YE LÄTTVIKT VENTILATED SHELL

Extremely lightweight hi-viz fluorescent ventilated safety helmet for work use. Equipped with reflectors visible in all directions and glow-in-the-dark forehead lamp clips to make the user more visible in darkness and poor conditions, enhancing work safety. Low-profile design intended for versatile use in both fall-hazardous environments and flat terrain work. Extremely large and effective non-closable ventilation openings with a total surface area of 83 cm²! Recommended model for industrial use, construction, rescue operations, etc. The new Petzl Vizir eye shield, Protector visor guard, Vizen full-face shield, or Vizen Mesh mesh visor can be quickly attached to the helmet using the included EasyClip quick-attachment clips, replacing the black pads on the sides of the helmet. All Bollé Safety electric welding masks can also be similarly attached using available adapters. Removal requires no tools—just press the buttons. Identical mounting points on front and back for example for forehead lamp quick-attachment plates or ID card holders. Side mounting points for hearing protectors. Compatible with most common helmet-mounted hearing protectors (e.g., Sordin). Rear attachment points for neck protection. Integrated side mounts for securing a forehead lamp to the forehead band. The Flip&Fit inner liner folds into the helmet during transport and is easy to unfold. Dual selector on the chin strap: The user can set the EN12492-compliant mode for fall-hazardous conditions (chin strap remains secured after a 50 daN (kg) jolt), or the EN397-compliant mode for flat terrain work (chin strap releases at a maximum of 25 daN (kg) jolt). A four-point harness keeps the helmet securely in place even in difficult working positions and provides excellent comfort. Thanks to the CenterFit adjustment system (53–63 cm), the helmet is always correctly centered and fits exceptionally well. The two side adjustment wheels, adjustable from the outside, are easy to use even with gloves on. The helmet has no obstructive, neck-straining, or field-of-vision-limiting brim, nor rigidizing ribs attached to the structure. Strato helmets offer good compatibility with other protective equipment. Recommended for use with GVS Elipse respirators and Bollé Safety eye protectors. - 5.1.1. Impact attenuation from a falling single object (5 kg dropped from 1 m height) - 5.1.2. Penetration resistance from a single penetrating object (3 kg sharp steel cone at 60 degrees dropped from 1 m height) - 5.1.4. Chin strap release: remains secured up to 15 daN jolt and releases at latest at 25 daN jolt (when Dual selector is set to 25 kg) - EN397 standard voluntary requirements: - 5.2.1. Protection at low temperatures (-30°C) - Does not meet EN397 standard requirement for free airspace above the head. - 5.7.3. Force required to open the chin strap must be high enough to prevent helmet detachment during a fall impact (when Dual selector is set to 50 kg) - 4.1.4. Effective ventilation (sufficient total opening surface area) - 4.2.1.1. Impact attenuation from objects falling from over 1 meter (5 kg dropped from 2 m height) - 4.2.1.2. Frontal impacts - 4.2.1.3. Lateral impacts - 4.2.1.4. Rear impacts - 4.2.2. Penetration resistance from multiple objects (3 kg sharp weight dropped from 1 m height twice) - 4.2.3. Strength of the headband - 4.2.4. Tilt test (10 kg falling load tears the helmet upward from front and rear at the crown) Maximum service life of 10 years, resulting in over 77% less environmental waste compared to standard helmets. Shell material: ABS. Weight: 425 g. Material and manufacturing warranty: 3 years. CE EN12492. ANSI/ISEA Z89.1-2014 Type 1 Class C LT, High Visibility. EAC. UIAA. - Vizir - eye shield with EasyClip quick-attach clips (A015AA00) - Vizir Shadow - tinted eye shield with EasyClip quick-attach clips (A015BA00) - Protector - guard for This product description is an automated translation of the original Finnish description.