PLASTIC PADDING 180ML GLASSFIBRE

Glass fiber reinforced filler for repairing and sealing large holes and cracks in glass fiber materials, metal sheets, metal, wood, etc. Suitable as a bottom filler for boat hulls and for repairing glass fiber hulls and car body panels.

Features

• Two-component polyester filler
• suited for repairing larger and deeper holes in fiberglass and metal
• higher strength due to integrated glass fiber reinforcement
• easy to shape and apply
• cures in 20 minutes at +20°C
• package size 180 ml
• color blue

INSTRUCTIONS FOR USE

Preparation: Sand the repair surface thoroughly to remove rust and paint.

Dispensing: Mix a golf ball-sized piece of filler (40 ml) with 3–4 cm of hardener (approx. 2–4%). Mix thoroughly until a homogeneous mass without air bubbles is achieved. Wear protective gloves and safety glasses!

Immediately close the filler and hardener packages after dispensing to prevent drying.

Application: Use a steel spatula. Spread the surface so that the mass penetrates the sanded area. Then immediately fill to the desired thickness (maximum 5 mm). Once the mass has cured, sand with sandpaper of grit 80–120. Optimal working temperature is +20°C.

Curing time: 20–30 minutes at 20°C.

Cleaning: Clean tools immediately after use with acetone or cellulose thinner.

This product description is an automated translation of the original Finnish description.