Roll over image to zoom in
PLASTIC PADDING 180ML ELASTIC
- versatile, highly elastic two-component polyester filler
- easy to sand
- for filling and leveling
- ideal for plastic, wood, and fiberglass
- can also be used on slightly vibrating surfaces such as wooden floors
- cures in 25 minutes at +20°C
- package size 180 ml
- color: greenish gray
INSTRUCTIONS FOR USE
Preparation: Sand the repair area thoroughly. It is recommended to use sandpaper with a grit of 80–120. For plastic surfaces: Clean the surface with a detergent, rinse with water, and allow to dry.
Dispensing: Mix a golf ball-sized piece of filler (40 ml) with 3–4 cm of hardener (approximately 2%). Mix thoroughly until a homogeneous mass without air bubbles is achieved. Wear protective gloves and safety glasses!
Close the filler and hardener packages immediately after dispensing to prevent drying.
Application: Use a metal spatula. Spread the surface so that the compound penetrates the sanded area. Then immediately (within 5 minutes) fill to the desired thickness (maximum 3 mm). Once cured, sand with sandpaper of grit 80–120. Optimal working temperature is +20°C.
Curing time: 25–50 minutes at +20°C.
Cleaning: Clean tools immediately with acetone or cellulose thinner.
This product description is an automated translation of the original Finnish description.