FLOOR COVER FLEECE PROF 1X25M 180G/M2

PROF floor protection is suitable for protecting most floor surfaces. However, the adhesive floor protection is not suitable for counter-treated wood or parquet floors. The floor protection adheres to the floor without tapes and does not slip off. The PROF floor protection designed for protecting dry floors, stairs, and levels has an adhesive bottom side. The easy and quick-to-install floor protection stays in place and firmly adheres to the floor surface. The protection is easily removable and reusable, although the adhesive surface loses effectiveness with each use. The floor protection serves as a light and temporary shield during renovation. It protects surfaces from paint and other liquids and dampens impacts on the floor. The lightly water-vapor-permeable protection leaves no residue on the floor surface. Test the product's suitability for the floor material before actual protection. • Roll size: 1 x 25 m • Material: - Top layer: polyethylene film 10 µm, 40 g/m² - Middle layer: 100% polyester fleece fiber, 130 g/m² - Bottom layer: adhesive, 10 g/m² • Adhesive bottom side • Weight: 180 g/m² • Thickness: approx. 1 mm • Color: white PROF floor protection is intended solely for temporary protection. Protect the floor protection from direct sunlight. Avoid placing heavy point-load objects on top of the protection. INSTALLATION INSTRUCTIONS Turn off floor heating before installing the protection. The recommended installation temperature is +10…+30 °C. The protection should be overlapped by approx. 10 cm on all sides with the previous piece. The areas to be covered must be dry and clean. Never use the floor protection on surfaces treated or moistened within the last 72 hours. This product description is an automated translation of the original Finnish description.