FLOOR COVER FLEECE PROF 1X50M 180G/M2

PROF floor protection is suitable for protecting most floor surfaces. However, the adhesive floor protection is not suitable for treated wood or parquet floors. The floor protection adheres to the floor without tapes and does not slip off. The PROF floor protection designed for protecting dry floors, stairs, and levels has an adhesive underside. The easy and quick-to-install floor protection stays in place and firmly adheres to the floor surface. The protection is easily removable and reusable, although the adhesive surface loses effectiveness with each use. The floor protection serves as a light and temporary shield during renovation. It protects surfaces from paint and other liquids and dampens impacts on the floor. The lightly vapor-permeable protection leaves no residue on the floor surface. Test the product's suitability for the floor material before actual protection. • Roll size: 1 x 50 m • Material: - Top layer: polyethylene film 10 µm, 40 g/m² - Middle layer: 100% polyester fleece fiber, 130 g/m² - Bottom layer: adhesive, 10 g/m² • Adhesive underside • Weight: 180 g/m² • Thickness: approx. 1 mm • Color: white PROF floor protection is intended solely for temporary protection. Keep the floor protection away from direct sunlight. Avoid placing heavy point-load objects on top of the protection. INSTALLATION INSTRUCTIONS Turn off floor heating before installing the protection. The recommended installation temperature is +10…+30 °C. The protection should be overlapped by approximately 10 cm on all sides with the previous piece. The areas to be covered must be dry and clean. Never use the floor protection on surfaces treated or moistened less than 72 hours ago. This product description is an automated translation of the original Finnish description.