BOREHOLE PUMP WATMAN PM 18-12 / VS 2/10 1-V (40m)

The 40 m 1-v Uppo-Pyke package includes a pre-dimensioned submersible borehole pump and cable. A lifting rope is available as an optional accessory.

UPPO-PYKE pumps are designed for clean and cold borehole water that may temporarily contain small amounts of sand (max. 100 g/m³, particle size max. 2.0 mm). They are suitable for domestic water supply and irrigation in single-family homes, holiday homes, agriculture, and industry.

Features

• Franklin motor
• fits a 4" borehole
• suitable for water lifting also from ring wells or lakes
• easy to install and operate
• low operating costs
• silent operation
• does not require a separate pump room
• can be installed horizontally or vertically (for horizontal installation, contact Pumppulohja customer service)
• optional accessories include cooling pipe and pump guardian
• rotation direction counterclockwise when viewed from the outlet
• built-in check valve: additionally, it is recommended to install a separate external check valve
• water temperature 0 °C – 40 °C
• 2-year warranty
• 1-V 2W motors equipped with automatic starter
• The automatic starter prevents starting if voltage is too low, protecting the motor.
• If the pump jams, for example due to high sand content, the automatic starter briefly rotates the pump in the opposite direction, after which the rotation direction normalizes.

Pyke pumps are most commonly used with a pressure tank as a pressurized water system. When water consumption is low, the pressure tank and pressure switch can be replaced by a pressure controller (single-phase), which starts the pump immediately when the tap is opened and stops it when the tap is fully closed. They can also be operated manually for irrigation or pumping into open tanks.

This product description is an automated translation of the original Finnish description.