SEAWATER PUMP KS 1100 PAINESÄÄTIMELLÄ

Pump designed for clean and cold seawater. The pump has a pressure regulator that controls the pump operation and is equipped with dry-run protection. The device is suitable for short-term pumping of seawater. The pump has excellent suction performance and is comparable to, for example, ISKU-Jet pumps. The cost-effective MERI KS 1100 pump is a viable alternative to stainless steel Jet pumps, which may be rapidly corroded by seawater. Usage and Installation

• In seawater use, the pump’s service life is limited. It is recommended to flush the pump with fresh water if it has been unused for an extended period (e.g., during winter).
• Always use the Pumploch freshwater filter on the suction side to protect the pump from impurities. Replace the filter as needed.
• Warning: Do not operate the pump against a closed valve or dry.
• Install in a dry, frost-protected location.
• Always fill the pump and suction pipe before starting. Always install a check valve and filter at the end of the suction pipe.

Specifications

• Pump casing and impeller made of plastic; shaft made of high-quality stainless steel
• Suction pipe: plastic pipe, 32 mm or 40 mm
• Electric motor: 1.1 kW, 230 V, 1-V
• Equipped with power cable and plug
• Current: 5.0 A
• Suction height: max. 8 m
• Flow rate: max. 70 l/min
• Max. pressure: 5.0 bar
• Connections: R1” SK suction and pressure

This product description is an automated translation of the original Finnish description.