HEAT REGULATOR EHEAT 130 ENCLOSURE M12

The eHeat thermostat is freely configurable via a web browser, touch screen, or the controller's own display. It is an intelligent thermostat that can be optimized according to system and environmental conditions. IO points can be expanded as needed. The controller also features weather forecasting control and demand-response functionality. eHeat131 controller - heating distribution controller (e.g., single-family homes, low-rise apartments, row houses) - compatible with eHeat124 - eHeat131 is designed for 3-circuit heating distribution applications - eHeat131 is a module component for DIN rail mounting (8 modules) - eHeat131 is ordered as a separate product and installed manually into the enclosure Additional options - eHeat131 can be supplemented with additional IO from eHeat124 - eHeat131 can also be ordered as eHeat131 + 2 pieces of eHeat124 additional IO, enabling up to 5 heating circuits. In this solution, components must be installed manually into an enclosure or a suitable enclosure must be requested. Functional features - domestic hot water control based on a fixed setpoint using supply water temperature - heating network control via a 5-point control curve based on supply water temperature, fixed setpoint, or a setpoint provided via cloud service - heating network control based on a fixed outdoor temperature setpoint, local outdoor temperature measurement, or manually or via bus-supplied value - sensor fault alarm in all temperature measurements - configurable control deviation alarms for network supply water measurements - network pump fault alarms - network pump shutdown when no heating demand exists - weekly rotation of pumps and control valves during shutdown periods - network pressure measurements or pressure alarms - district heating supply and return temperature measurements - cold water metering and leak alarm - configurable upper and lower limit alarms for district heating supply temperature and network pressure measurements - network pump control conflict alarms - energy meter connection via bus (Kamstrup) - pump connection via bus (Grundfos) - domestic hot water tank charging Other features - clear graphical display and five buttons - Ethernet RJ45 connector (not eHeat120M) - 2 x RS485 bus - SD card slot - connectable to monitoring systems or cloud services - freely configurable IO - widely compatible sensors - 1 x pulse counter - Modbus RTU (optionally MS/TP) Ethernet features - email alerts - WebVisu - Modbus TCP/IP (optionally BACnet IP) IO points - 12 x relay outputs - 12 x digital inputs - 12 x analog inputs - 6 x analog outputs This product description is an automated translation of the original Finnish description.