AUXILIARY CONTACT ACTI 9 ACTI9 IOF 1OC 100MA TO 6A

Acti9 auxiliary contact iOF

The Acti9 iOF auxiliary contact indicates the contact state and is designed for installation in commercial buildings, either as new or retrofitted. The product is compatible with Acti9 series devices and meets the requirements of EN/IEC 60947-5-1 and GB/T 14048.5 standards. Certifications: CE and UKCA.

Features

• For AC networks, the rated current In is 100-6 A at a frequency of 50-60 Hz with a voltage of 240 VAC and 100-3 A at a frequency of 50-60 Hz with a voltage of 415 VAC. For DC networks, the rated current In starts at 100 mA with a voltage of 24-130 VDC. It rises to 6 A at 24 VDC, 2 A at 48 VDC, 1.5 A at 60 VDC, and 1 A at 130 VDC.
• Switch is single-position, contacts type 1 C/O
• Compatible with Acti9 series devices such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA, iC60 RCBO, iDT40, iDT40 XA, and iDD40
• The iOF designation is used as the device's short name or compatibility code
• Terminal connection at the bottom, allows rigid copper cable (1–4 mm²) and flexible copper cable (0.5–2.5 mm²)
• Connection for two rigid copper cables: cross-section 2.5 mm²
• Connection for two flexible copper cables with screw: cross-section 1.5 mm²
• Rated insulation voltage (Ui) up to 500 V
• Rated impulse withstand voltage (Uimp) 4 kV
• Width in 9 mm increments: 1 module
• Dimensions: width 9 mm, height 86 mm, depth 73 mm
• Color white (RAL 9003)
• Contamination degree 3, tropicalization level treatment 2: device operates reliably even in challenging, dusty, and humid environments
• Tightening torque 1 N·m (bottom), PZ1 screwdriver type
• IP protection class IP20 (IEC 60529)
• Operating temperature -35 °C to +70 °C
• Storage temperature -40 °C to +85 °C

This product description is an automated translation of the original Finnish description.