ANCHOR SORMAT S-KA+ 16X168/50 ZP 10PCS

High-quality Finnish-made updated Sormat S-KA+ electroplated M16 wedge anchor. Premium domestic torque-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body, manufactured from carbon steel through cold working, is durable and safe, effectively withstanding loads applied to the fastening. Surface treatment is electroplating (? 5 µm) according to EN ISO 4042, followed by Cr3+ compliant passivation. Recommended environment: dry indoor areas. The product has European Technical Approval ETA-16/0934 for fastenings into concrete (Option 1). The product is also CE marked. The product is classified for fire resistance up to R120 in concrete installations. Installation Steps

1. Drill a hole according to the product specifications. 2. Clean the hole with a wire brush and air pump. Cleaning: brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically using an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. During tightening, the anchor wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and thickness of the attached component are marked on the anchor body. A length marking identifier K is located at the end of the anchor body.

Features

• Pack size: 10 pcs
• Wedge anchor type designation: nominal diameter x length / fastening thickness
• Thread length: 110 mm
• Spanner size: AV24
• Compatible substrates: concrete and natural stone
• Suitable for fastenings in both cracked and uncracked concrete
• Also suitable for seismic applications (seismic performance class C2)
• Drill hole diameter: 16 mm
• Drill hole depth: 110 mm
• Fastening material thickness: 50 mm

This product description is an automated translation of the original Finnish description.