ANCHOR SORMAT S-KAH+ 16X123/5 STAINLESS A4 1PCS

High-quality Finnish-made Sormat S-KAH+ A4 acid-resistant M16 wedge anchor. Premium domestic torque-controlled wedge anchors are suitable for pre-installation, through-installation, and remote installation. The anchor body, manufactured from cold-worked A4 steel (1.4578), is durable and safe, effectively withstanding loads applied to the fastening. Recommended for indoor, outdoor, and industrial use. The product has European Technical Approval ETA-16/0934 for fastenings in concrete (Option 1). The product is also CE marked. The product is fire classified up to R120 in concrete installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole with a wire brush and air pump. Clean with brush x 2, pump x 2, brush x 2. 3. Drive the anchor into place with a hammer or mechanically with an installation tool. 4. Tighten the anchor to the specified torque value using a torque wrench. As the anchor is tightened, its wings expand against the hole walls, and the resulting friction securely holds the anchor in place. The anchor size and thickness of the attached component are marked on the anchor body. A length marking tag G is located at the end of the anchor body. Packaging size: 1 piece. Packaging type: small pack. Wedge anchor type designation: nominal diameter x length / fastening thickness. Thread length 65 mm. Spanner size AV24. Suitable substrates: concrete and natural stone. Suitable for fastenings in both cracked and uncracked concrete. Also suitable for seismic applications (seismic performance class C2). Drill hole diameter 16 mm. Drill hole depth 110 mm. Thickness of attached material 5 mm. This product description is an automated translation of the original Finnish description.