CONC SCREW SORMAT S-CSA P (L) 6X45/5/10 ZINC PLATED 100PCS

Sormat S-CSA P (L) concrete screw manufactured in Finland with a low profile head and Torx drive. The carbon steel screw is cold-formed and provides a reliable fastening that is strong enough to penetrate even hard materials. The concrete screw features a hardened special thread that forms its own thread in the base material. Surface treatment: electroplated zinc coating (? 5 µm) in accordance with EN ISO 4042. The screw is fully removable. Tensile strength of the screw: 800 MPa. Recommended environment: dry indoor conditions. The product has European Technical Approval ETA-17/1009 for anchoring into concrete and precast hollow core slabs. Based on this approval, the product is also CE marked. Fire rated for concrete installations up to R120. The concrete screw is designed for through-installations. Installation steps: 1. Drill a hole according to product specifications. 2. Clean the hole thoroughly. 3. Insert the screw through the material to be fastened until the anchor base contacts the material. We recommend using a suitable impact screwdriver for installing concrete screws. No pre-defined torque setting. The design allows for small minimum edge and spacing distances between anchors. Packaging size: 100 pcs. The screw has a partial thread with a thread length of 40 mm. Screw head: T30, head diameter 14.5 mm, head height 3.5 mm. Suitable substrates: concrete, hollow core slab, solid brick, and solid calcium silicate brick. Suitable for fastening into both cracked and uncracked concrete. Drill hole diameter: 6 mm. Drill hole depth: 50 mm. Thickness of material to be fastened: 5/10 mm. This product description is an automated translation of the original Finnish description.